Hot melt glue stick is a hot melt glue product at home nowadays and is a godsend for craft lovers. It has a wide range of bonding, high bonding strength, and strong workability. Many people who have never used hot melt glue sticks are not sure how to use a hot melt glue stick, so that we will talk about it below.
Regarding using the hot melt glue stick, the more formal way of operation is to use a hot melt glue gun to apply glue. The hot melt glue gun can control the temperature more precisely, making the glue application more operable and controlling the amount of glue very well.
The correct way to operate a hot melt glue gun is as follows.
Insert the hot melt glue stick into the glue groove of the glue gun while the gun is in a relaxed state.
Plugin the hot melt glue gun, turn on the switch and warm up the machine to melt the glue stick fully.
When applying glue, let the muzzle of the glue gun aim at the object to be glued, pull the trigger, control the amount of glue by hand, and evenly spread the melted glue on the object's surface to be glued.
I am pressing the glued objects together to produce adhesive strength after cooling.
The hot melt glue gun should be set up to avoid accidents when the gluing operation is temporarily suspended.
When gluing is all done, disconnect the power supply. If the glue stick is not used up, there is no need to take it out and insert a new stick when no glue is pushed out in the next use.
Because the hot melt glue stick has a very wide range of bonding, it can bond many kinds of items. Such as used to stick hair cards, brooches, small handicrafts, and other things. Many DIY enthusiasts use it to make crafts and even make some weird little inventions, such as hot melt glue phone cases and so on.
In addition to using a hot melt glue gun, in the field conditions do not allow any hot melt glue gun, you can also be flexible to take other methods to glue operation. Such as, you can directly use a lighter to heat one end of the hot melt glue stick. To be melted, the glue will be applied to the object to be glued, and then press the object, wait for the glue to solidify into a solid in this OK.